This specification informs about the shape of the needle tip
and its size as well as the shape of its assembly. It is customary to express
this value in thousandths of an inch. In tapered needles, sizes greater than
0.7 thousand should not be allowed, and between two tapered needles, the
smaller radio is better, as it will better read the walls of the furrow,
reducing the effect of the tap. Conical needles should not be greater than 0.3
thousand the radius smaller or greater than 0.7 thousand the largest.
Bookmark Us
Our Sponsors
Popular Posts
-
It must have medium characteristics between the requirements of recording and reproduction, although more importance is given to the reprod...
-
The velocity of the plate depends on parameters external to the turntable, such as the supply voltage, the frequency of the elect... -
The location of the turntable with respect to the loudspeakers should be carefully studied, as they often appear coupling or feedbacks ...
-
The demands of this head are much less critical than the others of recording or reproduction, since its function is to record on...
Popular Posts
-
It must have medium characteristics between the requirements of recording and reproduction, although more importance is given to the reprod...
-
The velocity of the plate depends on parameters external to the turntable, such as the supply voltage, the frequency of the elect... -
The location of the turntable with respect to the loudspeakers should be carefully studied, as they often appear coupling or feedbacks ...
-
The demands of this head are much less critical than the others of recording or reproduction, since its function is to record on...
-
To decrease the effective mass of the mobile assembly and obtain sufficient output voltage to excite the pre-amp input of the equipm... -
This specification informs about the shape of the needle tip and its size as well as the shape of its assembly. It is customary to expr...
-
The noise (rumble) is the sum of all disturbances that accompany the signal provided by the cartridge and that do not belong to the mu...
-
The turntable unit. All turntables work more or less the same way. They consist of a platter that rotates the disk, and a pick... -
A cartridge capsule is a mechanic-electric transducer destined to convert the mechanical movements that transmits the groove of a disc in... -
The magnetic heads of recording, reproduction or erasure it is possible to distinguish two main components: A) Magnetic nucleus. B) ...
0 comentarios:
Post a Comment