CLASSIC HI-FI EQUIPMENT

The location of the turntable with respect to the loudspeakers should be carefully studied, as they often appear coupling or feedbacks ...

The mission of the reading arm is reduced to keeping the tip of the needle in the groove of the disc without giving any distortion or re...

A) Heads and number of tracks.  The width of the standard cassette tape is 3.8 mm instead of the 6.35 mm of the reel to reel tape or open...

The movement of the arm with respect to the disc can be radial, as occurs in the majority of the turntables the needle describes an ar...

The location of the turntable with respect to the loudspeakers should be carefully studied, as they often appear coupling or feedbacks ...

The mission of the reading arm is reduced to keeping the tip of the needle in the groove of the disc without giving any distortion or re...

A) Heads and number of tracks.  The width of the standard cassette tape is 3.8 mm instead of the 6.35 mm of the reel to reel tape or open...

The movement of the arm with respect to the disc can be radial, as occurs in the majority of the turntables the needle describes an ar...

Functions as important as recording require for their perfect execution, some kind of indication more precise than the operato...

The displacement of the arm on the plane of the disk, the tip of the needle describes a circumference by rotating about its vertical ax...

A good quality of reproduction depends, in a very important way, on the perfection of the silences, therefore: 1) Frequently exam...

This factor of great importance in all the systems of transmission of information is of singular importance in the case of the re...

To decrease the effective mass of the mobile assembly and obtain sufficient output voltage to excite the pre-amp input of the equipm...

The main elements of a magnetic head are the coils and the gaps (two sets , each one corresponding to a stereo channel). These gaps e...