SITE DEDICATED TO THE WORLD OF HIGH FIDELITY
2017-06-06
It is understood by needle the part of a capsule cartridge that makes the contact with the furrow of the disc, and to this part we will refer in this section.
In its construction different materials have been used having been adopted in recent times by its hardness the sapphire, ruby and diamond; of these practically nowadays the diamond is used exclusively in the construction of capsules destined to the reproduction of high fidelity.
The wear of any needle must be monitored to avoid damage to the furrows of the discs irreparably, because in high fidelity the cost of the collections of discs far exceeds the price of a set of replacement needle.
We'll appreciate the wear by the appearance of noises; the reproduction will lose transparency and distortion will appear in high frequencies with losses of these high frequencies. The user of a hi-fi team must be aware that you will need to change the needle of your capsule every 300 hours of use if you want not to endanger your discs, and take care of their cleanliness with a certain frequency, as it usually deposits particles of fat and dust that prevent the needle from tracing the furrow.
Posted by hifisnecma on 1:42 PM No comments »
Search
Popular Posts
-
Functions as important as recording require for their perfect execution, some kind of indication more precise than the operato...
-
The location of the turntable with respect to the loudspeakers should be carefully studied, as they often appear coupling or feedbacks ...
-
When in the 50's of the last century the "High Fidelity" apparatuses appeared successfully, the difficulty arose ...
-
This factor of great importance in all the systems of transmission of information is of singular importance in the case of the re...
Recent Posts
Blog Archive
Powered by Blogger.
Social Icons
Featured Posts
Blog Archive
-
▼
2017
(51)
-
▼
June
(30)
- TURNTABLES. TONE ARMS.
- TURNTABLES AND FINE ADJUSTMENT OF THE SPEED AND IT...
- THE PLATE, MATERIAL AND SHAPE.
- ARM MOVEMENT IN STEREO TURNTABLE.
- STEREO TURNTABLES. TRACTION SYSTEMS.
- PLATE TURNTABLE
- PRECAUTIONS AND TIPS FOR GOOD REPRODUCTION.
- OUTPUT VOLTAGE OF MAGNETIC CARTRIDGE.
- CHANNEL BALANCE OF MAGNETIC CARTRIDGE
- STYLUS TIP
- INTERMODULATION DISTORTION IN MAGNETIC CARTRIDGE
- SEPARATION BETWEEN CHANNELS OF MAGNETIC CARTRIDGE.
- SUPPORT FORCE OF A MAGNETIC CARTRIDGE.
- FREQUENCY RESPONSE OF MAGNETIC CARTRIDGE
- CHARACTERISTICS OF MAGNETIC CARTRIDGE
- MAGNETIC CARTRIDGE. INDUCED MAGNET SYSTEM.
- MAGNETIC CARTRIDGE. MOBILE MAGNET SYSTEM
- MAGNETIC CARTRIDGES. MOBILE COIL SYSTEM.
- DYNAMIC PROCESSORS
- CASSETTES DECKS
- MAGNETIC CARTRIDGES
- CRYSTAL CARTRIDGES
- STYLUS NEEDLES FOR TURNTABLES
- CARTRIDGE CAPSULE
- STEREO TUNERS
- CD PLAYERS
- TURNTABLES SYSTEMS
- EQUALIZERS
- REVERBERATION AMPLIFIERS
- INTEGRATED STEREO AMPLIFIER
-
▼
June
(30)
Breaking
Technology
Sports
Fashion
Business
Header Ads
Footer Widget 3
Sample text
Footer Widget 1
Sample Text
Sample Text
Followers
Social Icons
Menu
Footer Widget 2
Recent In Internet
Recent Post
Pages
Trendy LIST

Blogger Tricks
Blogger Themes
Popular Posts
-
Functions as important as recording require for their perfect execution, some kind of indication more precise than the operato...
-
The location of the turntable with respect to the loudspeakers should be carefully studied, as they often appear coupling or feedbacks ...
-
When in the 50's of the last century the "High Fidelity" apparatuses appeared successfully, the difficulty arose ...
-
This factor of great importance in all the systems of transmission of information is of singular importance in the case of the re...
-
This feature reports the amount of signal the cartridge will provide to succeed the pre-amp. The tension varies with the speed, so it i...
-
The movement of the arm with respect to the disc can be radial, as occurs in the majority of the turntables the needle describes an ar...
-
Noise reduction systems. Most high fidelity cassette decks incorporate a noise reduction system, of which the most common is ...
-
To decrease the effective mass of the mobile assembly and obtain sufficient output voltage to excite the pre-amp input of the equipm...
-
The main elements of a magnetic head are the coils and the gaps (two sets , each one corresponding to a stereo channel). These gaps e...
-
The mission of the reading arm is reduced to keeping the tip of the needle in the groove of the disc without giving any distortion or re...


0 comentarios:
Post a Comment